An update on susceptibility-weighted imaging in brain gliomas.

Susceptibility-weighted imaging (SWI) has become a standard component of most brain MRI protocols. While traditionally used for detecting and characterising brain hemorrhages typically associated with stroke or trauma, SWI has also shown promising results in glioma assessment. Numerous studies have highlighted SWI's role in differentiating gliomas from other brain lesions, such as primary central nervous system lymphomas or metastases. Additionally, SWI aids radiologists in non-invasively grading gliomas and predicting their phenotypic profiles. Various researchers have suggested incorporating SWI as an adjunct sequence for predicting treatment response and for post-treatment monitoring. A significant focus of these studies is on the detection of intratumoural susceptibility signals (ITSSs) in gliomas, which are indicative of microhemorrhages and vessels within the tumour. The quantity, distribution, and characteristics of these ITSSs can provide radiologists with more precise information for evaluating and characterising gliomas. Furthermore, the potential benefits and added value of performing SWI after the administration of gadolinium-based contrast agents (GBCAs) have been explored. This review offers a comprehensive, educational, and practical overview of the potential applications and future directions of SWI in the context of glioma assessment. CLINICAL RELEVANCE STATEMENT: SWI has proven effective in evaluating gliomas, especially through assessing intratumoural susceptibility signal changes, and is becoming a promising, easily integrated tool in MRI protocols for both pre- and post-treatment assessments. KEY POINTS: • Susceptibility-weighted imaging is the most sensitive sequence for detecting blood and calcium inside brain lesions. • This sequence, acquired with and without gadolinium, helps with glioma diagnosis, characterisation, and grading through the detection of intratumoural susceptibility signals. • There are ongoing challenges that must be faced to clarify the role of susceptibility-weighted imaging for glioma assessment.

Influence of the Different Maturation Conditions of Cocoa Beans on the Chemical Profile of Craft Chocolates.

Cocoa beans (Theobroma cacao L.) can be used for craft chocolate production, which arouses consumer interest due to their perceived better quality. This study aimed to evaluate the chemical profile of 80% artisanal chocolate samples produced with cocoa beans subjected to different maturation conditions. In the first maturation process, beans were matured under no-oxygen conditions, and in the second, the toasted beans were matured in oak barrels. The volatile compounds of the chocolate samples were extracted by the solid-phase microextraction method in headspace mode and analyzed by gas chromatography/mass spectrometer. The non-volatile compounds were extracted with methanol and analyzed through paper spray mass spectrometry. Overall, 35 volatile compounds belonging to different chemical classes (acids, alcohols, aldehydes, ketones, esters, and pyrazines) were identified, such as propanoic acid and butane-2,3-diol. In addition, 37 non-volatile compounds, such as procyanidin A pentoside and soyasaponin B, were listed. Tannins, flavonoids, and phenylpropanoids were the main chemical classes observed, varying between the two samples analyzed. Therefore, it was possible to verify that maturation conditions affected the metabolomic profile of the 80% artisanal chocolate samples, being able to influence the sensory characteristics and bioactive compounds profile. Given these results, the sensory evaluation of these chocolates is suggested as the next step.

Evaluation of surface roughness, wettability and adhesion of multispecies biofilm on 3D-printed resins for the base and teeth of complete dentures.

OBJECTIVE: This study evaluated the surface roughness, wettability and adhesion of multispecies biofilms (Candida albicans, Staphylococcus aureus and Streptococcus mutans) on 3D-printed resins for complete denture bases and teeth compared to conventional resins (heat-polymerized acrylic resin; artificial pre-fabricated teeth). METHODOLOGY: Circular specimens (n=39; 6.0 mm Ø × 2.0 mm) of each group were subjected to roughness (n=30), wettability (n=30) and biofilm adhesion (n=9) tests. Three roughness measurements were taken by laser confocal microscopy and a mean value was calculated. Wettability was evaluated by the contact angle of sessile drop method, considering the mean of the three evaluations per specimen. In parallel, microorganism adhesion to resin surfaces was evaluated using a multispecies biofilm model. Microbial load was evaluated by determining the number of Colony Forming Units (CFU/mL) and by scanning electron microscopy (SEM). Data were subjected to the Wald test in a generalized linear model with multiple comparisons and Bonferroni adjustment, as well as two-way ANOVA (α=5%). RESULTS: The roughness of the conventional base resin (0.01±0.04) was lower than that of the conventional tooth (0.14±0.04) (p=0.023) and 3D-printed base (0.18±0.08) (p<0.001). For wettability, conventional resin (84.20±5.57) showed a higher contact angle than the 3D-printed resin (60.58±6.18) (p<0.001). Higher microbial loads of S. mutans (p=0.023) and S. aureus (p=0.010) were observed on the surface of the conventional resin (S. mutans: 5.48±1.55; S. aureus: 7.01±0.57) compared to the 3D-printed resin (S. mutans: 4.11±1.96; S. aureus: 6.42±0.78). The adhesion of C. albicans was not affected by surface characteristics. The conventional base resin showed less roughness than the conventional dental resin and the printed base resin. CONCLUSION: The 3D-printed resins for base and tooth showed less hydrophobicity and less adhesion of S. mutans and S. aureus than conventional resins.

Hemophagocytic Lymphohistiocytosis (HLH) Flare Following the COVID-19 Vaccine: A Case Report.

Hemophagocytic lymphohistiocytosis (HLH) is a rare hyperinflammatory state that leads to overactivation of the immune system due to underlying disease. It can lead to multiorgan failure and death if not treated properly. HLH after vaccination is rare but has been reported in a few cases. Here, we present a case of a patient who developed HLH after she received the COVID-19 vaccine. Workup was done to find the underlying cause of her symptoms. However, as all investigations yielded negative results, the close temporal association with the COVID-19 vaccine suggested that the vaccine might have been the causative factor. She was treated appropriately with steroids and discharged with follow-up appointments. The exact pathogenesis of HLH caused by COVID vaccine is unknown, but it is likely related to the inflammatory response caused by the vaccine in the body. The treatment of HLH depends on the treatment of underlying conditions causing the HLH. Very few cases have been reported in the literature regarding HLH caused by COVID vaccine. Immediate recognition and treatment are imperative for improved prognosis and improved chances of survival.

A nontoxic strontium nanoparticle that holds the potential to act upon osteocompetent cells: An in vitro and in vivo characterization.

Estrogen deficiency, long-term immobilization, and/or aging are commonly related to bone mass loss, thus increasing the risk of fractures. One option for bone replacement in injuries caused by either traumas or pathologies is the use of orthopedic cement based on polymethylmethacrylate (PMMA). Nevertheless, its reduced bioactivity may induce long-term detachment from the host tissue, resulting in the failure of the implant. In view of this problem, we developed an alternative PMMA-based porous cement (pPMMA) that favors cell invasion and improves osteointegration with better biocompatibility. The cement composition was changed by adding bioactive strontium-nanoparticles that mimic the structure of bone apatite. The nanoparticles were characterized regarding their physical-chemical properties, and their effects on osteoblasts and osteoclast cultures were assessed. Initial in vivo tests were also performed using 16 New Zealand rabbits as animal models, in which the pPMMA-cement containing the strontium nanoparticles were implanted. We showed that the apatite nanoparticles in which 90% of Ca2+ ions were substituted by Sr2+ (NanoSr 90%) upregulated TNAP activity and increased matrix mineralization. Moreover, at the molecular level, NanoSr 90% upregulated the mRNA expression levels of, Sp7, and OCN. Runx2 was increased at both mRNA and protein levels. In parallel, in vivo tests revealed that pPMMA-cement containing NanoSr 90%, upregulated two markers of bone maturation, OCN and BMP2, as well as the formation of apatite minerals after implantation in the femur of rabbits. The overall data support that strontium nanoparticles hold the potential to up-regulate mineralization in osteoblasts when associated with synthetic biomaterials.

Effects of apigenin on gastric cancer cells.

Gastric Cancer (GC) is one of the most prevalent cancers worldwide. As the currently available therapeutic options are invasive, new and more benign options are being explored. One of which is Apigenin (Api), a natural flavonoid found in fruits and vegetables, such as celery, parsley, garlic, bell pepper and chamomile tea. Api has known anti-inflammatory, -oxidant, and -proliferative proprieties in several diseases and its potential as an anticancer compound has been explored. Here we systematize the available data regarding the effects of Api on GC cells, in terms of cell proliferation, apoptosis, Helicobacter pylori (H. pylori) infection, and molecular targets. From the literature it is possible to conclude that Api inhibits cell growth in a dose- and time-dependent manner, which is accompanied by the reduction of clone formation and induction of apoptosis. This occurs through the Akt/Bad/Bcl2/Bax axis that activates the mitochondrial pathway of apoptosis, resulting in restriction of cell proliferation. Additionally, it seems that the anti-proliferative potential of Api on GC cells is particularly relevant in a more aggressive GC phenotype but can also affect normal gastric cells. This indicate that this flavonoid must be used in low-to-moderate doses to avoid side-effects induced by disturbance of the normal epithelium. In H. Pylori-infected cells, the literature demonstrates that Api reduces inflammation by diminishing the levels of H. pylori colonization, by preventing NF-kB activation and by diminishing the production of reactive oxygen specimens (ROS). Accordingly, in GC Api seems to regulate different hallmarks of cancer, such as cell proliferation, apoptosis, cell migration, inflammation and oxidative stress, demonstrating its potential has an anti-GC compound.

Comparative analysis of the physical, chemical, and microbiological properties of Ti-6Al-4V disks produced by different methods and subjected to surface treatments.

STATEMENT OF PROBLEM: To improve the osseointegration of dental implants and reduce microbiological growth, different micro- and nanoscale surface topographies can be used. PURPOSE: The purpose of this in vitro study was to evaluate the influence of Ti-6Al-4V with 4 surfaces, machined (DU), machined+hydroxyapatite (DUHAp), machined+acid-alkali treatment (DUAA), and additive manufacturing (DMA), on the physical, chemical, and microbiological properties. MATERIAL AND METHODS: The topography of Ti-6Al-4V disks with the 4 surfaces was evaluated by scanning electron microscopy (SEM), the chemical composition by energy dispersive X-ray spectroscopy (EDS), and the crystalline structure by X-ray diffraction (XRD). Physical and chemical properties were analyzed by using wettability and surface free energy, roughness, and microbial adhesion against Staphylococcus aureus by colony forming units (CFU). One-way ANOVA analysis of variance and the Tukey multiple comparisons test were applied to evaluate the data, except CFU, which was submitted to the Kruskal-Wallis nonparametric test (α=.05). RESULTS: DU photomicrographs showed a topography characteristic of a polished machined surface, DUHAp and DUAA exhibited patterns corresponding to the surface modifications performed, and in DMA the presence of partially fused spherical particles was observed. The EDS identified chemical elements inherent in the Ti-6Al-4V, and the DUHAp and DUAA disks also had the ions from the treatments applied. XRD patterns revealed similarities between DU and DMA, as well as characteristic peaks of hydroxyapatite (HA) in the DUHAp disk and the DUAA. Compared with DU and DMA the DUHAp and DUAA groups showed hydrophilic behavior with smaller contact angles and higher surface free energy (P<.05). DMA showed a higher mean value of roughness, different from the others (P<.05), and a higher CFU for S. aureus (P=.006). CONCLUSIONS: DUHAp and DUAA showed similar behaviors regarding wettability, surface free energy, and bacterial adhesion. Among the untreated groups, DMA exhibited higher roughness, bacterial adhesion, and lower wettability and surface free energy.

Impact of enhancement filters of a CMOS system on halo artifact expression at the bone-to-implant interface.

OBJECTIVE: To assess the impact of enhancement filters on the formation of halo artifacts in radiographs of dental implants obtained with a complementary metal oxide semiconductor (CMOS) system. METHODS: Digital radiographs of dental implants placed in dry human mandibles were processed with the Noise Reduction smoothing filter, as well as the Sharpen 1, Sharpen 4, and Sharpen UM high-pass filters available in the CLINIVIEW™ software (Instrumentarium Dental, Tuusula, Finland). Subjective analysis involved evaluating the left, right, and apical surfaces of each implant for the presence of much, few, or no halo. The objective analysis involved measurement of the halo area using the Trainable Weka Segmentation plugin (ImageJ, National Institutes of Health, Bethesda, MD, USA). Data were analyzed using Friedman's test (subjective analysis) and ANOVA (objective analysis) (α = 5%). RESULTS: In the subjective evaluation, the Sharpen 4 filter produced more radiographs with much halo present, and in the objective evaluation, a bigger halo area when compared to the original images and the Noise Reduction filter for all surfaces (p < 0.05). CONCLUSIONS: When evaluating dental implants, priority should be given to original images and those enhanced with smoothing filters since they exhibit fewer halo artifacts. CLINICAL RELEVANCE: Post-processing tools, such as enhancement filters, may improve the image quality and assist some diagnostic tasks. However, little is known regarding the impact of enhancement filters in halo formation on CMOS systems, which have been increasingly used in dental offices.

Differential effects of the lipidic and ionic microenvironment on NPP1's phosphohydrolase and phosphodiesterase activities.

Ecto-nucleotide pyrophosphatase/phosphodiesterase 1 (NPP1) is an enzyme present in matrix vesicles (MV). NPP1 participates on the regulation of bone formation by producing pyrophosphate (PPi) from adenosine triphosphate (ATP). Here, we have used liposomes bearing dipalmitoylphosphatidylcholine (DPPC), sphingomyelin (SM), and cholesterol (Chol) harboring NPP1 to mimic the composition of MV lipid rafts to investigate ionic and lipidic influence on NPP1 activity and mineral propagation. Atomic force microscopy (AFM) revealed that DPPC-liposomes had spherical and smooth surface. The presence of SM and Chol elicited rough and smooth surface, respectively. NPP1 insertion produced protrusions in all the liposome surface. Maximum phosphodiesterase activity emerged at 0.082 M ionic strength, whereas maximum phosphomonohydrolase activity arose at low ionic strength. Phosphoserine-Calcium Phosphate Complex (PS-CPLX) and amorphous calcium-phosphate (ACP) induced mineral propagation in DPPC- and DPPC:SM-liposomes and in DPPC:Chol-liposomes, respectively. Mineral characterization revealed the presence of bands assigned to HAp in the mineral propagated by NPP1 harbored in DPPC-liposomes without nucleators or in DPPC:Chol-liposomes with ACP nucleators. These data show that studying how the ionic and lipidic environment affects NPP1 properties is important, especially for HAp obtained under controlled conditions in vitro.

Electrostimulable polymeric films with hyaluronic acid and lipid nanoparticles for simultaneous topical delivery of macromolecules and lipophilic drugs.

This study focused on developing electrically stimulable hyaluronic acid (HA) films incorporating lipid nanoparticles (NPs) designed for the topical administration of lipophilic drugs and macromolecules. Based on beeswax and medium-chain triglycerides, NPs were successfully integrated into silk fibroin/chitosan films containing HA (NP-HA films) at a density of approximately 1011 NP/cm2, ensuring a uniform distribution. This integration resulted in a 40% increase in film roughness, a twofold decrease in Young's modulus, and enhanced film flexibility and bioadhesion work. The NP-HA films, featuring Ag/AgCl electrodes, demonstrated the capability to conduct a constant electrical current of 0.2 mA/cm2 without inducing toxicity in keratinocytes and fibroblasts during a 15-min application. Moreover, the NPs facilitated the homogeneous distribution of lipophilic drugs within the film, effectively transporting them to the skin and uniformly distributing them in the stratum corneum upon film administration. The sustained release of HA from the films, following Higuchi kinetics, did not alter the macroscopic characteristics of the film. Although anodic iontophoresis did not noticeably affect the release of HA, it did enhance its penetration into the skin. This enhancement facilitated the permeation of HA with a molecular weight (MW) of up to 2 × 105 through intercellular and transcellular routes. Confocal Raman spectroscopy provided evidence of an approximate 100% increase in the presence of HA with a MW in the range of 1.5-1.8 × 106 in the viable epidermis of human skin after only 15 min of iontophoresis applied to the films. Combining iontophoresis with NP-HA films exhibits substantial potential for noninvasive treatments focused on skin rejuvenation and wound healing.

Computed diffusion-weighted imaging in patients with transient neurovascular symptoms with and without ischemic infarction.

PURPOSE: Detection of ischemic lesions in patients with transient neurovascular symptoms is relevant for the estimation of the risk of a subsequent stroke and etiological classification. To improve detection rates, different technical approaches have been used, such as diffusion-weighted imaging (DWI) with high b-values or higher magnetic field strength. Here, we sought to investigate the value of computed DWI (cDWI) with high b-values in these patients. METHODS: From an MRI report database we identified patients with transient neurovascular symptoms who underwent repeated MRI including DWI. cDWI was calculated with a monoexponential model with high b-values (2000, 3000, and 4000 s/mm2) and compared to the routinely used standard DWI with regard to presence of ischemic lesions and lesion detectability. RESULT: Overall 33 patients with transient neurovascular symptoms (71 [IQR 57-83.5] years; 21 [63.6%] male) were included. On DWI, acute ischemic lesions were observed in 22 (78.6%). Acute ischemic lesions were observed in 17 (51.5%) patients on initial DWI, and in 26 (78.8%) patients on follow-up DWI. Lesion detectability was rated significantly better on cDWI at 2000s/mm2 compared to standard DWI. In 2 (9.1%) patients, cDWI at 2000s/mm2 revealed an acute ischemic lesion proven on follow-up standard DWI which was not detected with certainty on the initial standard DWI. CONCLUSION: cDWI might be a valuable addition to routinely acquired standard DWI in patients with transient neurovascular symptoms since its use might result in improved ischemic lesion detection. A b-value of 2000s/mm2 seems most promising for clinical practice.

Index and Repeat Ablation for Atrial Fibrillation in Older versus Younger Patients: A Propensity-Score Matching Analysis.

Catheter ablation is a well-established rhythm control therapy in atrial fibrillation (AF). Although the prevalence of AF increases dramatically with age, the prognosis and safety profile of index and repeat ablation procedures remain unclear in the older population. The primary endpoint of this study was to assess the arrhythmia recurrence, reablation and complication rates in older patients. Secondary endpoints were the identification of independent predictors of arrhythmia recurrence and reablation, including information on pulmonary vein (PV) reconnection and other atrial foci. Older (n=129, ≥70 years) and younger (n=129, <70 years) patients were compared using a propensity-score matching analysis based on age, gender, obesity, hypertension, dyslipidemia, diabetes mellitus, dilated left atrium, severe obstructive sleep apnea, cardiac disease, left systolic ventricular function, AF pattern and ablation technique. Arrhythmia recurrence and reablation were evaluated in both groups using a Cox regression analysis in order to identify predictors. During a 30-month follow-up period, there were no significant differences between older and younger patients in the arrhythmia-free survival (65.1% and 59.7%; log-rank test p=0.403) and complication (10.1% and 10.9%; p>0.999) rates after the index ablation. However, the reablation rate was significantly different (46.7% and 69.2%; p<0.05, respectively). In those patients who underwent reablation procedure (redo subgroups), there were no differences in the incidence of PV reconnection (38.1% redo-older and 27.8% redo-younger patients; p=0.556). However, the redo-older patients had lower reconnected PVs per patient (p<0.01) and lower atrial foci (2.3 and 3.7; p<0.01) than the redo-younger patients. A further important finding was that age was not an independent predictor of arrhythmia recurrence or reablation. Our data reveal that the AF index ablation in older patients had a similar efficacy and safety profile to younger patients. Therefore, age alone must not be considered a prognostic factor for AF ablation but the presence of limiting factors such as frailty and multiple comorbidities.

New Perspectives on Circulating Ferritin: Its Role in Health and Disease.

The diagnosis of iron disturbances usually includes the evaluation of serum parameters. Serum iron is assumed to be entirely bound to transferrin, and transferrin saturation-the ratio between the serum iron concentration and serum transferrin-usually reflects iron availability. Additionally, serum ferritin is commonly used as a surrogate of tissue iron levels. Low serum ferritin values are interpreted as a sign of iron deficiency, and high values are the main indicator of pathological iron overload. However, in situations of inflammation, serum ferritin levels may be very high, independently of tissue iron levels. This presents a particularly puzzling challenge for the clinician evaluating the overall iron status of the patient in the presence of an inflammatory condition. The increase in serum ferritin during inflammation is one of the enigmas regarding iron metabolism. Neither the origin, the mechanism of release, nor the effects of serum ferritin are known. The use of serum ferritin as a biomarker of disease has been rising, and it has become increasingly diverse, but whether or not it contributes to controlling the disease or host pathology, and how it would do it, are important, open questions. These will be discussed here, where we spotlight circulating ferritin and revise the recent clinical and preclinical data regarding its role in health and disease.

Beyond the exome: utility of long-read whole genome sequencing in exome-negative autosomal recessive diseases.

BACKGROUND: Long-read whole genome sequencing (lrWGS) has the potential to address the technical limitations of exome sequencing in ways not possible by short-read WGS. However, its utility in autosomal recessive Mendelian diseases is largely unknown. METHODS: In a cohort of 34 families in which the suspected autosomal recessive diseases remained undiagnosed by exome sequencing, lrWGS was performed on the Pacific Bioscience Sequel IIe platform. RESULTS: Likely causal variants were identified in 13 (38%) of the cohort. These include (1) a homozygous splicing SV in TYMS as a novel candidate gene for lethal neonatal lactic acidosis, (2) a homozygous non-coding SV that we propose impacts STK25 expression and causes a novel neurodevelopmental disorder, (3) a compound heterozygous SV in RP1L1 with complex inheritance pattern in a family with inherited retinal disease, (4) homozygous deep intronic variants in LEMD2 and SNAP91 as novel candidate genes for neurodevelopmental disorders in two families, and (5) a promoter SNV in SLC4A4 causing non-syndromic band keratopathy. Surprisingly, we also encountered causal variants that could have been identified by short-read exome sequencing in 7 families. The latter highlight scenarios that are especially challenging at the interpretation level. CONCLUSIONS: Our data highlight the continued need to address the interpretation challenges in parallel with efforts to improve the sequencing technology itself. We propose a path forward for the implementation of lrWGS sequencing in the setting of autosomal recessive diseases in a way that maximizes its utility.

Effects of LED Lights on Bulk Fill Resin Polymerization

The present study analyzed the microhardness and degree of conversion of three Bulk Fill resins (M1 - Filtek Bulk Fill; M2 - Tetric N-Ceram Bulk Fill and M3 - Opus Bulk Fill) polymerized by single peak and polywave Light-emitting Diode Curing Lights. A total 90 test specimens (n=10) were obtained using a Teflon matrix for the purpose of testing microhardness; and for degree of conversion: 135 specimens (n=5) by using a 2 x 6 cm matrix. The specimens were light polymerized using 3 light sources (L1 - Optilight Max, L2 - Bluephase, L3 - VALO). They were kept in artificial saliva om an oven at 37±1°C during the experiment. The degree of conversion was measured by FTIR 24 h after obtaining each test specimen. The microhardness readouts were performed with a microdurometer at the time intervals of 48 hours (T0), 7 days (T1), 14 days (T2) and 21 days (T3). M1L3 was found to show the highest microhardness values in T2, and M1 showed the lowest degree of conversion in the deep third with L1. It was concluded that Filtek Bulk Fill resin showed the best results in comparison with the other resins.

El presente estudio analizó la microdureza y el grado de conversión de tres resinas Bulk Fill (M1 - Filtek Bulk Fill; M2 - Tetric N-Ceram Bulk Fill y M3 - Opus Bulk Fill) polimerizadas por lámparas de curado de diodo emisor de luz de pico único y polionda. Se obtuvieron un total de 90 especímenes de prueba (n=10) utilizando una matriz de teflón con el propósito de probar la microdureza; y para grado de conversión: 135 especímenes (n=5) utilizando una matriz de 2 x 6 cm. Las muestras se fotopolimerizaron utilizando 3 fuen- tes de luz (L1 - Optilight Max, L2 - Bluephase, L3 - VALO). Se mantuvieron en saliva artificial en estufa a 37 ±1°C durante el experimento. El grado de conversión se midió por FTIR 24 h después de obtener cada muestra de prueba. Las lecturas de microdureza se realizaron con un microdurómetro en los intervalos de tiempo de 48 horas (T0), 7 días (T1), 14 días (T2) y 21 días (T3). Se encontró que M1L3 mostraba los valores más altos de microdureza en T2, y M1 mostraba el grado más bajo de conversión en el tercio profundo con L1. Se concluyó que la resina Filtek Bulk Fill mostró los mejores resultados en comparación con las demás resinas.

Dynamics of Serologic Change to Gluten in Celiac Disease Patients.

Serologic measures of tissue transglutaminase (tTG) immunoglobulin A (IgA) and deamidated gliadin peptide (DGP) IgA and immunoglobulin G (IgG) are hallmark tests utilized when diagnosing individuals for celiac disease (CeD) and for monitoring adherence to a gluten-free diet (GFD), currently the only available treatment for CeD. We address two issues in this study: (i) the relapse to seropositivity for CeD patients who resume a gluten containing diet and (ii) the correlation between two different tTG-IgA assays near the upper limit of normal (ULN) designated thresholds. Regarding the first issue, often a suspected CeD individual is put back on a gluten diet to return to their serologic levels. However, we show it requires a substantial amount of gluten for serology to return to a positive level. For example, in one study of 22 patients treated with placebo and taking 84 g of gluten over 6 weeks, only two converted from seronegative to seropositive for tTG-IgA. Regarding the second topic, we compare the relationship for different serologic assays, namely tTG-IgA AB (recombinant, ULN = 4 units/mL) vs. tTG-IgA (non-recombinant, ULN = 20 units). There is a strong correlation between both measurements as evidenced by a Pearson coefficient of R = 0.8584; however, we observed that the cross-correlation in terms of sensitivity and specificity improved substantially by using an ULN value of three instead of four for the tTG-IgA AB (recombinant) assay. This result suggests that assay thresholds used for initial diagnosis in patients who have not yet started a GFD may need to be adjusted for monitoring and in the setting of a diagnostic gluten challenge.

Annexin A5 stabilizes matrix vesicle-biomimetic lipid membranes: unravelling a new role of annexins in calcification.

Matrix vesicles are a special class of extracellular vesicles thought to actively contribute to both physiologic and pathologic mineralization. Proteomic studies have shown that matrix vesicles possess high amounts of annexin A5, suggesting that the protein might have multiple roles at the sites of calcification. Currently, Annexin A5 is thought to promote the nucleation of apatitic minerals close to the inner leaflet of the matrix vesicles' membrane enriched in phosphatidylserine and Ca2+. Herein, we aimed at unravelling a possible additional role of annexin A5 by investigating the ability of annexin A5 to adsorb on matrix-vesicle biomimetic liposomes and Langmuir monolayers made of dipalmitoylphosphatidylserine (DPPS) and dipalmitoylphosphatidylcholine (DPPC) in the absence and in the presence of Ca2+. Differential scanning calorimetry and dynamic light scattering measurements showed that Ca2+ at concentrations in the 0.5-2.0 mM range induced the aggregation of liposomes probably due to the formation of DPPS-enriched domains. However, annexin A5 avoided the aggregation of liposomes at Ca2+ concentrations lower than 1.0 mM. Surface pressure versus surface area isotherms showed that the adsorption of annexin A5 on the monolayers made of a mixture of DPPC and DPPS led to a reduction in the area of excess compared to the theoretical values, which confirmed that the protein favored attractive interactions among the membrane lipids. The stabilization of the lipid membranes by annexin A5 was also validated by recording the changes with time of the surface pressure. Finally, fluorescence microscopy images of lipid monolayers revealed the formation of spherical lipid-condensed domains that became unshaped and larger in the presence of annexin A5. Our data support the model that annexin A5 in matrix vesicles is recruited at the membrane sites enriched in phosphatidylserine and Ca2+ not only to contribute to the intraluminal mineral formation but also to stabilize the vesicles' membrane and prevent its premature rupture.